Truck DVS - Direct Vision Standard system
A video surveillance and parking assistance system designed for trucks is designed to eliminate blind spots invisible to the driver and to protect pedestrians and cyclists.
The system warns cyclists or pedestrians about the upcoming maneuver of the truck by emitting an audible signal on the outside, and an audible signal from the parking system in the cab informs the driver of obstacles on the sides of the truck.
The DVS system is mounted on the right or left side of the truck - depending on the country where the truck will be driven, in exceptional cases the DVS system can be installed on both sides of the truck.
The DVS system is activated automatically. The system is activated by the CAN bus controller when the vehicle reach less than 35 km/h and CAN bus controller automatically deactivates the DVS system when the truck speed exceeds 35 km/h.
The outdoor audible alarm can be controlled by a button and can be turned off at night in sleeping areas so as not to interfere with the rest of the population.
Direct Vision Standard equipment includes:
- In-Cab monitor - 7''
- In-Cab sensor audible signal for driver warning
- High definition side blind spot view camera
- Side detection sensors to locate pedestrians and cyclists in the blind spot
- Audible turning signal outside of the vehicle - 90 dB
- CAN BUS on/off controller
- Switches, mounting connectors, fasteners
|Input voltage (V)||24 V DC|
|Power consumption (A)||10 mA|